General Description - KS Tools 160.0424 Notice D'utilisation

Dear customer,
KS Tools thanks you for your trust and for buying one of its products.
In this manual, you will find every safety warnings and precautions, operating, maintenance and cleaning
procedures. Please, read it carefully before using the product. Keep this manual and invoice in a safe and dry
place for future reference. The manufacturer cannot be held responsible for damage or injury caused by
improper use of this appliance.

1. GENERAL DESCRIPTION

The user must ultimately make the decision regarding suitability of the product with professional's helping for any given
task and assume the responsibility of safety for himself or herself and others in the work area.
RATED CAPACITY
MIN. HEIGHT
MAX. HEIGHT
NET HEIGHT
2. WARNING
To avoid personal injury or property damage during system operation, read and follow all CAUTIONS,
WARNINGS, and INSTRUCTIONS, included with or attached to each product. SUPPLIER CANNOT BE
RESPONSIBLE FOR DAMAGE OR INJURY RESULTING FROM UNSAFE USE OF PRODUCT, LACK OF
MAINTENANCE, OR INCORRECT PRODUCT AND SYSTEM APPLICATION.
1. The maximum load capacity is 0.6 ton. DO NOT exceed this rated capacity.
2. This jack is used as an aid in the removal and installation of a transmission or a differential as individual
components. DO NOT use it for any other purpose it is not designed to perform.
3. DO NOT use this transmission jack as a vehicle lifting device or as a vehicle support.
4. Keep children and unauthorized persons away from the work area.
5. Remove loose clothing. Remove ties, watches, rings and other loose jewelry, and contain long hair.
6. Always wear ANSI approved safety goggles when operating this jack.
7. Keep proper balance and footing, do not overreach and wear nonskid footwear.
8. Only use this equipment on a surface that is stable, level, smooth and capable of sustaining the load. Keep the
surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
9. Inspect the jack before each use. DO NOT use if bent, broken, cracked, leaking or otherwise damaged , any
suspect parts are noted or it has been subjected to a shock load.
10. Vehicle must be properly and adequately supported before starting repairs.
11. DO NOT use this jack to lift or support assemblies such as a differential with axle, or a transmission with bell
housing which will be bulky and difficult to balance, and may cause the jack to tip over and lead to property
damage and/or serious personal injury.
12. Center load on the saddle and be sure the setup is stable and secure.
Never move this jack with a load any higher off ground than necessary and move it slowly and carefully.
13. Transfer load immediately to appropriate support device for service or repair.
14. DO NOT operate this jack when you are tired or under the influence of alcohol, drugs or any intoxicating
medication.
15. DO NOT allow untrained persons to operate this product and DO NOT make any modifications to this product.
16. DO NOT expose the equipment to rain or snow.
0.6 TONNES
1175 MM
1985 MM
32 KG