Burg Wächter WS 11 Instructions De Montage page 14

D. Tools
• Phillips screwdriver / drilling machine / scale /
pencil / hammer
• Drill Ø 2,5 / 6,5
• Saw / file / vice for shortening screws (if necessary)
E. Assembly
Before mounting please check the function of
the window / window door. It must be possible to
open and close properly. Please measure whether
the on page 5 required dimensions are available
for your window / French door.
Use a 1 mm thick underlay to create a distance
from the window leaf and mark the 3 drilling
positions with a pencil.
16 | English
Open the window
protection with the
attached key and pull
off the key. Turn the
pivot lever to the side
and hold the window
protection on the
window frame to the
desired position.
Deepen the markings
lightly with e. g. a screw
tip / hammer and drill
the 3 holes with a Ø
6,5 drill.
Do not drill through
the window frame.
WinSafe WS 11