Zephyr Essentials Siena Guide D'utilisation, D'entretien Et D'installation page 15

SURFACE MAINTENANCE:
Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and
buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Do not use any product containing chlorine bleach. Do not use "orange" cleaners.
need not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if
heavily soiled.
1. Push in on spring loaded handle
LIST OF PARTS AND ACCESSORIES
DESCRIPTION
Replacement Parts
Optional Accessories
Recirculating Kit
Duct Cover Extension Kit
Universal Make-Up Air Damper
To order parts, visit us online at http://store.zephyronline.com or call us at 1.888.880.8368
PART#
ZRC-00SI
Z1C-00SI
MUA008A
13