Button(S) Description - VINCENT STU-1 Manuel D'utilisation

Operation
Radio Data
System (RDS)
Change the brightness
of the front panel dis-
play
Vincent
34
OPERATING THE APPLIANCE
Button(s) Description
RDS (Radio Data System) enables text information transmitted from VHF stati-
ons to be displayed. However, not every station includes RDS in its transmissi-
on signal. By pressing (maybe repeatedly) the "RDS" button, you can switch
the service on and off as well as select the different types of text information.
PS
By actuating (repeatedly, if needed) the button "RDS MODE" the RDS service
can be switched on or off as well as the various options of text information can
be selected. "RDS" is displayed on the screen, if one of the RDS modes is acti-
RDS MODE
vated. The set RDS mode remains saved till the next time the tuner is switched
(7)(26)
on. The STU-1 supports three following RDS modes:
PS
CT
PTY
RDS OFF RDS switched off
This function can only be operated using the associated remote control but-
DIMMER ton. When repeatedly pressed, the display (2) brightness is sequentially
(17) reduced (1x or 2x), switched off (3x) and restored to the original, maxi-
mum brightness (4x).
PTY CT RDS OFF
Station name the station name is shown on the display
using a maximum of eight characters.
Time display the time is shown. The display shows the
current time, for example "CLK 17:09".
Programme type the type of radio broadcast (for example
"CLASSIC", if mainly classical music is
played) is displayed.
only the station frequency can be seen.