Genie LT-400 Guide D'utilisation page 13

Rotary Trimmer
Choose favoured blade
The GENIE LT 400 is supplied by 3 different blades. The blades are arranged in the
three storage compartments at one end of the trimmer co-ordinately. You can easily
take them off for use. It is not necessary to turn the trimmer around.
Note
Please choose your favoured blade to
Cutting capacity
1) Straight line: 10 sheets/ 70g/㎡
2) Wavy line: 8 sheets/ 70g/㎡
3) Perforated lines: 5 sheets/ 70g/㎡
Changing the cutting blade
1. You have purchased a high quality product which is supplied by enclosed
blades to ensure user safety. Nevertheless please pay attention to the
following safety instructions:
Important safety advice:
a) Please only use original blades from GENIE. Other blades can cause
malfunctions or injuries!
b) Don't try to open one of the enclosed blades!
2. For changing the cutting blades, please lift up the cutting device, pull out the
blade and replace it by your favoured blade.
1 x straight line
1 x wavy line
1 x perforated line
cut:
13