Zafferano poldina LD0340B3 Mode D'emploi page 5

INSTRUCTIONS FOR USE
SWITCHING ON / SWITCHING OFF / DIMMING
Quick taps to:
- turn on
- turn off the lamp
<1 sec
COLOR TEMPERATURE CONFIGURATION
4 sec
When the lamp is switched off, press
lightly for 4 seconds until a steady blue
LED lights up
CHARGE / INDICATOR LEDS
Charge the battery before initial use.
To correctly charge the lamp, we recom-
mend that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the
plug from the electrical socket
1-2
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italia • For more information
and updates visit our website • www.zafferanoitalia.com
<1 sec
<1 sec
2200K
Quick tap on the touch sensor
to change the color temperature
of the lamp
3
When the lamp is switched on, lightly press the touch sensor to
obtain the desired brightness. Every time you turn it on, the light
intensity returns to 100%
<1 sec <1 sec
2700K 3000K
4 sec
Light pressure for 4 seconds to set
the new color temperature and switch off
the lamp
RED LED
charging in progress
GREEN LED
the battery is charged, it is
advisable to disconnect it from
the power charger
4