Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

3 - PERIODIC MAINTENANCE

Any further adjustments on the refrigerator necessarily require the
electric plug to be removed. Check periodically the supply cable in order
to detect any damage. If the power supply cable is damaged, don't use the
equipment and don't try to repair it: to prevent any risk, it must be replaced
by the manufacturer, by a member of the after-sales service staff, or anyway
by a person having similar qualifications. In any case, none of the protective
elements (the grill, the carter) must be removed by non qualified staff.
Absolutely avoid using the refrigerator without such protection.
The replacement of the display neon must be carried out only by an
Authorized Service Center.
PERIODIC CLEANING
When necessary for the unit cleaning, proceed as follows:
1) Remove the product from refrigerator
2) Unplug the unit. (Phot. 4)
3) We recommend for easy cleaning that the inside
temperature of the tank be equal to the ambient
temperature.
4) Extract the white plate (Phot. 5), taking care to hold it
as horizontal as possible to prevent any dirt from falling
into the compartment below. Wash the plate with water
and mild soap, rinse it and carefully dry it with a soft
cloth.
5) Clean the area below the plate sucking any dirt and/or
remnants with a properly powerful aspirator suitable for
liquids (Phot. 6).
6) Suck any dirt and/or remnants from the grid located in the
compartment on the front of the counter. (Phot. 7).
7) During cleaning:
-
NEVER use water sprays that may damage the
electrical components.
-
NEVER use any type of cleanser: just use a wet cloth.
8) NEVER use mechanical devices or any other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.
9) Switch on the unit and load the product .
INSTRUCTIONS FOR THE USER
Fot. 6
- 9 -
Fot.4
Fot. 5
Fot. 7

Publicité

Table des Matières
loading

Table des Matières