Fein MM 500 Plus Mode D'emploi page 13

Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
(**)
(Ax – Zx)
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the
General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise
there will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Gripping surface
Observe the information in the adjacent text!
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Product with double or reinforced insulation
Low oscillation rate
High oscillation rate
may contain numbers and letters
Marking for internal purposes
en
13