LD Systems LAX12DA Manuel D'utilisation page 9

LOW
11
This knob is used to control the low frequencies. You can use it, for example, to boost a bass drum, bass
HI-MID
12
This knob is used to control the hi-mids, which are slightly higher than the frequencies covered by the MID EQ.
This provides even greater flexibility when it comes to equalization of the important midrange frequencies.
MID-LOW
13
500 Hz).
AUX SEND CONTROLS
14
the POST position (button not pressed) the signal is sent after the channel fader, meaning that the volume set
CONTROL ELEMENTS:
9