Indicator Lights - patura 156001 Mode D'emploi

Indicator lights

No fence pulse
No electric fence voltage pulse received by the Alarm Monitor (the energiser may be
off
switched off, or the fence circuit is faulty).
Fence pulse
Each time this light flashes, a fence voltage pulse has been received by the Alarm
flash
Monitor.
Standby
The Alarm Monitor is in "Standby mode" and a fence fault will NOT cause the alarm to
off
be activated.
Armed
on
The Alarm Monitor is active and a fence fault will cause the alarm to be triggered.
Fence normal
off
The fence is operating normally within limits.
Fence fault
The Alarm Monitor has detected abnormal fence voltages. The fence alarm will also
flash
have been activated if the Alarm Monitor is armed.
Fence alarm memory
on
The Alarm Monitor is armed and a fence fault has caused the fence alarm to be
activated, but now fence voltage is normal.
- 11 -