Scansonic Q1000 Mode D'emploi page 8

•
Vol + key
■ Press Once to increase the volume in 1 level
■ Press & Hold to increase the volume continuously (a "bip"
sounds when the unit reaches volume max)
Turn the Bluetooth Speaker to Standby mode
1. When the Speaker is ON, press and hold the "standby key".
The Bluetooth LED would turn OFF. You mobile device ID
would be saved at the speaker.
Connect the Latest Paired Bluetooth Device
1. This is a quick method to connect the Speaker with the latest
Paired Device
2. When the unit is at Standby, press "Standby" key to switch
on the Bluetooth speaker, it would connect with the device
automatically; the BT LED would keep ON when connection
is success. If the speaker cannot find the latest Paired
Device, it would go to Waiting for Connection mode
Connect previous Paired Bluetooth Device
1. If you want to connect another paired device instead of
the latest paired one, please make sure the Bluetooth
connection of the latest device disconnect
2. Disconnect your latest connected device, the speaker will
change to Waiting for Connection Mode, the BT LED starts
flashing slowly
3. Turn ON your Bluetooth device (e.g. Smart Phone) and the
Bluetooth.
4. Select the "Scansonic Q1000" from your device Bluetooth
list to connect the speaker
5. The Bluetooth LED would keep ON at Blue when connected.
You can now play your music wirelessly with the Scansonic
Q1000
8
Q1000