Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the SOS number will be dialed out automatically after disc
the ECI call. The owner of the SOS number can control the unit by
pressing digit/num
When room monitor is activated, if the end user
from the pendant, the pendant will exit of room monitor, press the
button again it will dial out automatically after disconnecting the ECI
call. The owner of the SOS number can control the unit by press
digit/number 4/5/6. The operation is as above.
Note: When room monitor is activated, press red key on base or
pendant and the owner of the SOS number cannot control the phone
by pressing digital number 4/5/6
4.
It will make a howling noise if the pendant is within 1 meter aw
from the base, pressing the red button on the
noise because the pendant has been exited from room monitor,
the base is still in ECI mode. In ECI mode, when external line calls
in, pick up handle to receive EC
press hands free key to terminate ECI function.
Pendant power on/off operation
The pendant power is preset to OFF ex-factory, to switch it ON, just press
the red button once
1.
To set the pendant (OFF), press the red button for 10 seconds for
switching the pendant power off. A soun
2.
When Pendant is off, a normal on
button will power it up and a sound can be heard.
Note: The pendan
Handset of the base unit works in analog line when
power failure
On
ly the base unit will work on analog line in case of power failure and n
ba
t eries.
t
1. When the external call party calls the unit, the normal melody
sounds, pick up the handset to answer the call.
2. Make a call
number will be displayed on the LCD.
3. Mu
te function is available.
ber 4/5/6. The operation is as above first process.
t will be ON automatically when put on the charger.
from the base by picking up the handset, the dialed
pendant can stop the
I phone, hang up the handset or
d can be heard.
e touch press on the SOS red
48
onnecting
presses the red button
red
ay
but
o
Publicité
Table des Matières
