Press
the setting succeeds
REGISTRATION
This function allows the user to register a pendant to a specified base.
Press
section.
Press
Press the red button on the pendant to be registered to the base for
7secon , and white light will flash on the top of the pendant during the
ds
registration.
If the base is found, and the pendant is successfully registered, a tone
will be sounded, white light on the pendant will stop and the base will
turn back to standby mode. The Base assigns a number to the Pendant
such as "PENDT 1".
If the base isn't found or the pendant fails to register, "SEARCHING"
will keep flashing on the display and white light will keep flashing on
the top of the pendant till exit of registration menu.
Operations
Hands free operation & volume control
Press
key once to obtain a dial tone, dial your
answer a called party, you can begin your conversa
up the handset.
During the hands free mode, the user can adjust the hands free volume level
by pressing
1, 2, 3, 4, 5, 6).
Mute the mouthpiece
During a call (off-hook), press
the call muted word will be showed on LCD. Press
back to the talk mode and the call muted will disappear.
key to confirm your selection, a sound will be heard on
key, then use
key to confirm, "SEARCHING'' will flash on the display
or
key. There are 6 different volume levels (for Volume
or
key to select "REGISTRATION"
x
key once to mute the mouthpiece and
40
number, or to
tion without picking
x
key again to get
ce
.