Cleaning And Care - Unold 86855 Mode D'emploi

time elapses the appliance switches off automatically (a signal tone sounds
beforehand). If you do not make a time setting, the appliance will run con-
tinuously.
Anion function
8. The anion function refreshes the ventilated air. With the anion function
activated, the symbol is flashing. The anion function is always deactivated
in the factory. If you want to use the anion function, you must switch it on
by pressing the „ANION" button. The negatively-charged ions that are now
generated, clean the room air, dust particles are reduced. To switch off the
function, press the button again.
Aroma box
Switching off
10. Press the „ON/OFF" button again or the „ON/OFF" button on the remote
control unit to switch off the appliance. When you are no longer using the
appliance, unplug the plug from the electrical outlet.

CLEANING AND CARE

Switch off the appliance, by pressing the "ON/OFF" button, and unplug it
from the electrical outlet.
Never immerse the appliance in water. The motor or electrical components
of the appliance must not get wet.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot
cleaning agents or disinfectants.
2. Wipe off the housing and grille of the fan with a slightly damp cloth.
3. Store the fan in a dry, safe place so that it is protected from dust, impact,
heat and moisture.
Copyright UNOLD AG | www.unold.de
9. On the front of the appliance there is
an opening for the adding of fragrances. Pull
out the box and add, e. g. drizzle a few drops of
essential oil on the fleece in the box. You can
also place some fresh flower petals (e.g. rose
petals) in the aroma box. Then reseal the box.
Now the ventilated air is slightly scented with
the added fragrances.
23