Krups Automatic Espresso EA895 EVIDENCE ONE Mode D'emploi page 29

Roasting:
Turn the setting button located in the bean container (J), depending on your bean type and the power of the desired
aroma. This adjustment must be performed during grinding and notch by notch. After 3 preparations you will notice a
very distinct difference in taste.
Adjusting the coffee output
For all of the drinks proposed you can lower and reassemble the coffee outputs according to the size of your cup(s).
Fig. 16
Stopping a drink mid-preparation
You can stop the preparation at any time by pressing the back button
When a cycle is interrupted, stopping is not immediate. The machine will not be accessible for a period of time.
Preparation of two cups
Your device allows you to prepare two cups simultaneously. The dual cup function is valid for all directly accessible
recipes and is accessible simply by pressing twice before your selected beverage starts (except for
PREPARATION OF DIRECT ACCESS COFFEES
The stages of preparation of the drink:
- Bean grinding
- Compaction of the grinding
- Percolation
Starting a drink
- Check that the beans container is full.
- Check that there is water in the water tank: if there is not enough water the machine will tell you and ask you
to fill the tank.
- Place the cup or cups under the coffee nozzles.
- Press the button for the chosen drink.
Possible settings (see 2. Drinks settings and 3. Drinks settings in the More menu)
You can:
- Prepare 2 cups at the same time by first pressing on "x2".
- Vary the strength of your coffee using the Aroma + and the grinding setting button.
- Save the drink made by pressing on "
Adjust the volume of coffee being prepared using the navigation buttons
You can stop the preparation at any time by pressing
Light Average
(Blonde) (Amber)
Fav" once the drink is made.
.
Advanced Intense
(Light French) (French)
.
.
Very intense
(Dark French)
and ). Fig. 19
29