Cooktop Use - Amana AGS6603SFS Instructions D'utilisation

KEYPAD FEATURE
BROIL Broiling
START Cooking start
WARM Hold warm
OFF/CANCEL Range
function
TEMP/TIME Temperature
and time
adjust
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to IGNITE.
Before setting a control knob, place filled cookware on the
grate. Do not operate a burner using empty cookware or
without cookware on the grate.
6
INSTRUCTIONS
1. Press BROIL.
2. Press Temp/Time "up" or "down" arrow keypad until the desired temperature is reached.
A tone will sound if the minimum or maximum temperature is reached.
3. Press START. Preheat oven for 5 minutes.
4. Position cookware in oven and close the oven door.
5. To change the temperature, repeat Step 3. Press START.
6. Press OFF/CANCEL when finished.
The Start keypad begins any oven function. If Start is not pressed within 10 seconds, a tone will
sound and Start will blink until pressed or canceled. If Start is not pressed within 30 seconds after
pressing a keypad, the function is canceled and the time of day is displayed.
Food must be at serving temperature before placing it in the warmed oven.
1. Press WARM.
2. Temperature is set at 170°F (75°C). Press the Temp/Time "up" and "down" arrow keypads until
desired temperature is reached. A tone will sound if the minimum or maximum temperature is
reached.
3. Press START.
4. Press OFF/CANCEL when finished.
The Off/Cancel keypad stops any function except the Timer and Oven Control Lockout.
The Temp/Time "up" and "down" arrow keypads are used to adjust time and temperature
settings.

COOKTOP USE

To Set:
1. Push in and turn knob counterclockwise to IGNITE.
IMPORTANT: All 4 surface burners will click. Only the burner
with the control knob turned to IGNITE will produce a flame.
2. Turn knob to anywhere between HI and LO.
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle will
be disabled. An error tone will sound and the Cooktop On indicator
light will flash. If you turn on the cooktop when the Self-Cleaning
cycle is in use, it will disable the Self-Cleaning cycle and "END" will
be displayed.
Power Failure
In case of prolonged power failure, the surface burners can
be lit manually. Hold a lit match near a burner and turn knob
counterclockwise to IGNITE. After the burner lights, turn knob
to setting.