Levelling The Stove; System Connections; Electrical Connection; Improving The Combustion - CASATELLI LUDO Mode D'emploi

5.6 LEVELLING THE STOVE

The stove must be levelled by adjusting the feet
(where featured), then checked using a spirit level
(Fig. 5.10).
A B = Spirit level

5.7 SYSTEM CONNECTIONS

5.7.1 Electrical connection

The stove is connected to the electrical system
simply using the plug supplied.
The electrical connection (plug) must be easily
accessible when the stove is installed.
If the power cord is damaged it must be replaced
by the technical service or a qualified technician,
to prevent any kind of risk.
5.7.1.1 Earth
The system must be earthed and fitted with a
residual current circuit-breaker in accordance with
legislation in force (Fig. 5.11).
The flue must have its own earth connection.
5.7.2 Connection to an external timer thermostat
The stove can be connected to an external timer
thermostat that switches the stove on or off
according to the set temperature.
For electrical connection, refer to the wiring
diagram in the technical specifications.

5.8 IMPROVING THE COMBUSTION

A good combustion depends on several factors
(type of installation, operation and maintenance
conditions, type of pellet etc ..)
During the first burning, it is possible to optimize
the combustion of the stove.
If at the end of combustion in the brazier are many
waste, it is advisable to change the combustion
configurations (increasing the value) to find the
most satisfactory solution.
Refer to section "improving the combustion" of
the user manual.
24
INSTALLATION
fig. 5.10
fig. 5.11