Samsung BD-P1590 Mode D'emploi page 55

If there is a disc in the player :
•
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
• If the server service is not available :
" Update Server is under maintenance. Please try again later."
. To perform the system upgrade, press the _ + buttons to
select Start and then press the EnTEr button.
. The system update gets started.
. If you select Cancel during the download process, you are
prompted to confi rm your selection in a message box.
If you want to cancel the download, select Yes and press the
EnTEr button.
. Verifi cation will proceed. When download is done, the fi rmware
update process will begin automatically.
10. When the installation is done, the player will automatically turn
off in 5 seconds.
All settings will revert to the factory settings the next time you
start the system and you will see the menu language selection start the system and you will see the menu language selection
window.
M
If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button. If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button. If you want to cancel the upgrade in the process of downloading the upgrade data, press the If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.
You will see a confi rmation message.
Selecting Yes will end the upgrade process, and selecting No will continue the upgrade process.
When the system upgrade is done, check the fi rmware details in the System Upgrade menu.
Do not turn off the player during the System Upgrade, as it may cause the player to not work properly.
You must use a USB Flash Drive to do software upgrades using the USB Host jack.
Other USB devices(ex. MP3 player) are not guaranteed to work.
There should be only one fi rmware upgrade fi le in USB fl ash drive for the player to properly perform an
upgrade.
Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
Power On/Off sound
Music
Touch Key Sound
System Update
Photo
BD Data Management
1 2 3 4
Setup System Update
System Setup
No Disc No Disc No Disc No Disc No Disc No Disc
_ +
Language Setup
The new update data was found.
Audio Setup
Current Version : XXXXX
Display Setup
New Version : XXXXX
HDMI Setup
Network Setup
Start Cancel
Parental Setup
Power On/Off sound
Music
Touch Key Sound
System Update
Photo
BD Data Management
1 2 3 4 System Update
Setup System Setup
No Disc No Disc No Disc No Disc No Disc No Disc
_ +
Language Setup
Downloading update data...
Audio Setup
Please, do not turn off the power.
Display Setup
60%
HDMI Setup
Network Setup
Cancel
Parental Setup
Power On/Off sound
Music
Touch Key Sound
System Update
Photo
BD Data Management
1 2 3 4
Setup System Update
System Setup
No Disc No Disc No Disc No Disc No Disc No Disc
_ +
Language Setup
Do you want to cancel the update
Audio Setup
operation?
Display Setup
HDMI Setup
Network Setup
Yes No
Parental Setup
Power On/Off sound Power On/Off sound Power On/Off sound Power On/Off sound Power On/Off sound
Music
Touch Key Sound
System Update
Photo
BD Data Management
1 2 3 4
Setup System Update
System Setup
No Disc No Disc No Disc No Disc No Disc No Disc
_ +
Language Setup
Audio Setup
Verifying update data
Please wait.
Display Setup
HDMI Setup
Network Setup
Parental Setup
Power On/Off sound
Music
Touch Key Sound
System Update
Photo
BD Data Management
1 2 3 4
Setup System Update
System Setup
No Disc No Disc No Disc No Disc No Disc No Disc
_ +
Language Setup
Firmware Update.
Audio Setup Now, Processing...
Please, do not turn off the power.
Display Setup
The power will be off automatically
HDMI Setup
after update is fi nished.
Network Setup
Parental Setup
English _
: On
: On
+
: On
: On
+
: On
: On
+
: On : On : On : On : On
: On
+
: On
: On
+