Transponder; 3Unicable; Time Setting - AXIL RS 0761 HD Manuel De L'utilisateur

blue to pop the menu of scanning setting. After Configuring like single satellite scan,
press OK to start multi-satellites scan.
Channel Search
Scan the satellites or Transponders according the configurations.
Blind Scan
First scan the band to get the transponders which can be locked. After gathering
all Transponders, Scan the transponders one by one to get the programs.

4.3.2 Transponder

Press GOTO to switch the list to show transponders of the focused satellite. Also
you can press GOTO to switch back to satellites' list.
Add transponder: Press Red to add a new transponder. It can't save an existing
TP under the same satellite.
Edit transponder: Press Green to edit the focused transponder. It can't save an
existing TP under the same satellite.
Delete transponder: Press Yellow to delete the focused transponder. Press OK
to confirm.
Single Transponder Scan: Press Blue to pop the menu of scanning setting. After
configuring the settings, Press OK to start scanning.
Multi-Transponder Scan: Press OK to select transponders with the mark"ü",
then press blue to pop the menu of scanning setting. After Configuring
the settings, press OK to start multi-transponder scanning.

4.3.3Unicable

Unicable enables the delivery of broadcast programming to multiple users over a single
coaxial cable. It should work with Unicable LNB or SaTCR equipment.
Set the Unicable ON, and select a channel which isn't occupied by other users.
Dish setup with Unicable
When unicable activated, the DiSEqC1.0, DiSEqC1.1, DiSEqC1.2,DiSEqC1.3 are disabled.
Set Pos A/B for satellites if the equipment can support.

4.4 Time Setting

To access the Menu, press MENU then
select [Time]. The Menu provides options
to adjust the time settings.
UP/DOWN to select an option and press
RIGHT/LEFT to adjust the settings. Press
6
Press