Epg (Electronic Program Guide); Sort; Video Setting; Aspect Ratio - AXIL RS 0761 HD Manuel De L'utilisateur

Delete a TV or Radio Program
1. Select the Program and then press the BLUE button, A message will appear. Press OK
to delete the program.
2. Repeat the previous step to select more programs to delete.
Skip TV or Radio Program
1. Select the program you would like to skip and press the GREEN button. A skip symbol is
displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press EXIT key. Disable a skip TV or Radio program:
Press
the GREEN button on the skip program with the skip symbol.
Move a TV or Radio Program
1. Select the preferred program then press the RED button. A move symbol will appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels.
Lock Program
You can lock selected programs for restricted view. Lock a TV or Radio Program:
1.Select the preferred program then press the YELLOW button. A lock- shaped symbol is
displayed. The program is now marked as locked.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be require to enter either the default password
'000000' or your last set password.

4.1.2 EPG (Electronic program guide)

The EPG is an on-screen TV guide that shows scheduled
programs seven days in advance for every tuned channel.
Press the EPG button on the Remote Control to access
guide. You can use the UP/DOWN key to select the
preferred program. If there is more than one page of
information, use the BLUE button for page up and the
YELLOW button for page down
the EXIT button.

4.1.3 Sort

Sort your channels from the following options:[Default]- remain the original order.
[Encrypt]-Sort the channels in encrypt mode. [Service Name]-Sort the channels in
alphabetical order. [Service ID]-Sort the channels according to the service id.

4.2 Video Setting

To access the Menu, press MENU then select
[Picture]. The Menu provides options to adjust the
video settings. Press UP/DOWN to select an option
and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.

4.2.1 Aspect Ratio

You must set the display format to either 4:3 Pan Scan, 4:3 Letter Box,16:9 Wide Screen
or Auto to get the maximum display when watching TV.

4.2.2 Resolution

If the video does not appear correctly, change the setting. This setting is to match the most
common setting for HDMI. [480i]: for NTSC system TV. [480P]: for NTSC system TV. [576i]
for PAL system TV. [576P]: for PAL system TV. [720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.

4.2.3 TV format

If the video does not appear correctly, you need to change the settings. This should match
the most common setting for TVs in your country.[NTSC]: for NTSC system TV. [PAL]: for
PAL system TV; [Auto] :set TV format according to the stream automatically

4.2.4 Video output

[CVBS]: CVBS output. [RGB]: RGB output.

4.3 Channel Search

To access the menu, press MENU and select
[Search Channel]. The Menu provides options to
adjust the Search Channel settings. Select an option
4