Bimar DEU315 Notice D'instructions page 59

Air Purifier
button
Night
button
Timer
Button
Loc/unlock
button
• Weekly programming (only activate via Smartphone): sets: the on/off periods for each day
of the week, dehumidifier programmes, fan speed, and humidity levels.
For the on / off periods, select the time (hours and minutes) and confirm the operation (on
or off) and then the next (off or on). The periods can be repeated during the week.
Dehumidifier programs (normal, continuous, turbo and drying), and select the fan and
humidity level when allowed (see the details described previously).
•
Consult the log (only possible with Smartphone display): temperature and humidity for
each day/month/year during use.
Automatic defrost
Select the fan: "Max" or "Min", when selected, the
corresponding LED turns on:
Maximum: and Minimum:
Selects the air purifier.
The equipment operates continuously, purifying the air thanks
to the on-board filter.
This selection allows setting the minimum or maximum speed,
and the timer.
Selecting night operation deactivates the display and the LEDs.
The only the " " LED remains on, as well as full tank when it is
active.
This times the appliance operation or start-up: each time the
button is pressed, the time increases by one hour, up to a
maximum of 24 hours. If pressed again, the time is cancelled
(0:0 appears ).
Start-up Timer:
with the appliance in stand-by, press the button
until the desired time is reached (1 to 24 h). The time blinks for
about five seconds and then it is possible to set the programs
and fans. On the display, the "
Once the time set passes, the timer starts the appliance in the
previously set mode.
Operation Timer:
activate the appliance, set the programming
and fans, then select the timer for the desired time (1 to 24 h.
The time flashes for about five seconds. Once the time set on
the timer has been reached, the appliance turns off.
To lock the control panel buttons, press the button for about
three seconds and the indicator light on the button turns on.
To unlock the use of the buttons, repeat the operations in
reverse order.
During dehumidification, the defrost function is activated
based on the ambient temperature (T.A.):
- With T.A. 24 °C or greater, defrost is not activated.
" and " " indicators appear.