Roland DG MODELA pro II MDX-540 Mode D'emploi page 8

Table des Matières

Publicité

To Ensure Safe Use
WARNING
Install the machine in a location that is
level, stable, and able to bear the weight
of the machine.
The total weight including the stand and other
optional items may reach 300 kg (650 lb.) or
more. Installation in an unsuitable location may
cause a major accident, including tipover, fall, or
collapse.
Be sure to anchor the stand to the floor.
If the machine should begin to topple, a major
accident may result, including crushing of the
appendages or the body.
The cutting waste or workpiece may catch fire or pose a health hazard.
WARNING
Never attempt to cut magnesium or any
other such flammable material.
Fire may occur during cutting.
Keep open flame away from the work area.
Cutting waste may ignite. Powdered material is
extremely flammable, and even metal material
may catch fire.
When using a vacuum cleaner to take up
cutting waste, exercise caution to prevent
fire or dust explosion.
Taking up fine cuttings using an ordinary vacuum
cleaner may cause danger of fire or explosion.
Check with the manufacturer of the vacuum
cleaner. When the safety of use cannot be de-
termined, clean using a brush or the like, with-
out using the vacuum cleaner.
6
This machine weighs 300 kg (650 lb.)
WARNING
Unloading and emplacement are opera-
tions that must be performed by 4 per-
sons or more.
Tasks that require undue effort when performed
by a small number of persons may result in physi-
cal injury. Also, if dropped, such items may cause
injury.
CAUTION
Wear dust goggles and a mask. Wash away
any cutting waste remaining on the hands.
Accidentally swallowing or inhaling cutting waste
may be hazardous to the health.

Publicité

Table des Matières
loading

Produits Connexes pour Roland DG MODELA pro II MDX-540

Table des Matières