Theben LU 101 Manuel D'utilisation page 24

Manuale_LU101_105HF
ADAPTOR INSTALLATION
It is workable to insert adaptor in DC socket that provides power to
make the control unit work normally.
1. Remove the bottom cover with a flat-head screwdriver (See Fig. 3) .
2. Insert adaptor in DC socket from the bottom cover and make sure
LED of LU 101/105 HF works normally (See Fig. 27) .
3. Punch the reserved knock hole of bottom cover with a long nose
pliers (See Fig. 28) .
4. Replace bottom cover, and make sure the wires go through from the
reserved knock hole (See Fig. 29) .
Fig. 27
24
AC Adaptor
Fig. 29
2004.3.3 2:54 PM
DC 12V
Page 24
Fig. 28
Reserved knock hole