Publicité
Page 6
Dimensions et connexions
1/
2/
TAR
76 (3.0)
Vue arrière avec cadre de fixation
rear view with mounting frame
75 (2.95)
70 (2.76)
28 (1.1)
For all described products there is a declaration of conformity which describes that, when operated in accordance with the technical manual, the
criteria have been met that are outlined in the guidelines of the council for alignment of statutory orders of the member states on EMC-Directive
(2004/108/EC) and the Low Voltage Directive (LVD 2006/95/EC). This declarations are valid for those products covered by the technical manual
which itself is part of the declaration. To meet the requirements, the currently valid versions of the relevant standards have been used.
This statement is made from the manufacturer / importer
ELREHA Elektronische Regelungen GmbH
D-68766 Hockenheim
www.elreha.de
(name / adress)
original set up: 16.12.08, tkd/jr
3/
4/
P
ELREHA
Cadre de fixation
Dimensions
de découpe
checked: 17.12.08, kd/mh approved: 17.12.08, mkt/sha
Montage
EG-Conformity
by:
Werner Roemer, Technical Director
Hockenheim
.............
city
date
Notice technique TAR 1380-2
56 (2.2)
6.11.2008
.......................................................
sign
translated: 17.12.08, efra/tn
3 (.12)
Façade
interchangeable
Publicité
