Handling Precautions - Toa D-2000 Série Manuel De L'utilisateur

6. HANDLING PRECAUTIONS

• The power supply cords supplied with the D-2008SP and D-2012C are designed for exclusive use with each
equipment. Never use them with other equipment.
• It is recommended that the unit be always used in locations where the ambient temperature ranges from 5 ºC
to 40 ºC (41 to 104 ºF) and humidity is less than 90% (no condensation).
• The unit is a precision audio component. To prevent failure, do not give the unit strong shocks or vibrations.
• When mounting the D-2008SP in an equipment rack, be sure to mount a perforated panel larger than 1U
size* above and below the unit.
1
• When mounting the D-2012C in an equipment rack, be sure to mount a perforated panel larger than 1U size*
above the unit.
• Do not position the heat-generating component such as a power amplifier immediately below the D-2012C
in the rack. Also, keep such components away from each other so that the ambient temperature around the
D-2012C should not exceed +40 ºC (104 ºF). Failure to do so may shorten the product life.
• Do not place objects on the motorized faders of the D-2012C as these faders move up and down automatically
through operation such as preset memory recall.
• When using the multiple D-2008SP or D-2012C units, their firmware versions must be 3.0.0 or later, and the
D-2000 Setting software version must be 3.0.0 or later.
For details on how to check their versions, read the separate Setting Software Instructions, "Menu item
description."
Firmware of the D-2008SP and D-2012C can be updated using the Setting Software ver. 3.0.0 or later*
For details on how to update the firmware, read the separate Setting Software Instructions, "Method to Enable
Communications between the PC and the Unit."
The latest versions of the D-2000 Setting Software and Instruction Manual are made available on the TOA
product data download site (https://www.toa-products.com/international/).
• When cleaning the unit, be sure to turn the power switch to OFF. Wipe with a soft dry cloth. If it gets very dirty,
use the soft cloth slightly moistened in neutral cleanser. Never use thinner, benzene, chemically processed
towels, or alcohol as the unit's plastic or other parts may be deformed or discolored.
• About the wear-and-tear items
The D-2012C's following parts are wear-and-tear items. Replace them when they approach the end of their
useful lives, which vary depending on the environments or conditions of use. Note that the replacement of
such wear-and-tear parts is chargeable even when the unit is within the valid guarantee period.
· Motor fader:
· Rotary encoder: 30000 rotations (Approx. 12 years)
* 1U size = 44.5 mm or 1.75" (standard size)
1
* To update the D-2012C firmware ver. 2.0.0, use the dedicated "D-2012C Firmware Updater Software
2
Program." (Refer to the separate Installation Manual, "FIRMWARE UPDATE PROCEDURE.")
10
30000 reciprocations (Approx. 6 years)
1
.
2