Safety Measures; Riding Instructions - Yedoo TOO TOO I Manuel D'utilisation

EN

SAFETY MEASURES

The running bike in its basic equipment is designed
for riding during daylight in areas meant for sport and
recreation. For roads with car traffic or for riding in
the dark, you need to provide your running bike with
safety features (lights, reflectors, etc.) in accordance
with the regulations valid in your country. Make sure
the children obey general safety regulations or traffic
rules and that they use use protective accessories
(helmets, knee and elbow pads, good shoes, etc.)
Before each ride, always check good function of the
brakes and the overall technical condition of the
running bike. Do not exceed the maximum loading
capacity of the running bike (as specified on the
front side). The scooter is designed for one rider only!
Do not overload the scooter, it is not intended for
jumping or acrobatic riding.
Running bikes have headsets with integrated backs-
tops, which prevent the handlebars from turning
around. Therefore, do not turn the handlebars by
force to avoid damage to the backstops. Always
have the backstops repaired in a specialized cycle
repair centre.
All the speed-limiting mechanisms (brake pads or
discs, rims, and tires etc.) can become warm when
used. For this reason, it is not recommend-
able to touch them before cooling off!
RIDING
INSTRUCTIONS
Children can use the running bike only under the
supervision of an adult. It is important that the child
always grips the handles with both hands at when
riding. While seated and balancing, the child pushes off
alternating the feet as when running or walking fast.
WARNING: Children can develop a considerable speed,
so they should be properly instructed about the
possible dangers and braking methods by the parent
or the responsible adult. For braking, the child should
squeeze the brake lever on the handlebar or should
use soles of his/her shoes to slow down by puting
them to the ground.
WARNING: sudden violent braking may cause injury.
20
MAINTENANCE
Correct and regular maintenance increases safety and
lengthens the life span of the running bike. Regularly
inspect screw connections, quick releases, pressure in
tires and lubricate the moveable parts (wheels, bearings,
handlebars bearings, cables, brake parts etc.).
Make sure that no lubricant gets on the rims or brake
pads. Grease reduces their effect! If this situation
occurs, it is necessary to remove the grease from all
the parts, using a solvent and/or degreaser.
Inspect the tires for cuts, nicks and deformities. Repla-
ce tires that show excessive wear and damage with an
equivalent tire.
Inspect the self-locking nuts. If they get loose freely,
exchange them with new ones.
Check the spokes for defects. Irregular strain or loo-
seness in spokes can cause their cracking or can make
the wheel wobble.
Keep the running bike clean, use soft cloth moistened
with water. It should be stored inside, on a dry and
shaded place. Do not expose the running bike to high
humidity or extreme temperatures over a long period
of time. Before the winter, prepare it against corrosion
and inflate the tires to its maximal value as specified
on the side of the tire. The producer does not cover
damage caused solely by neglected maintenance,
non-adequate adaptation, or inappropriate treatment
and storage.
The product complies with the corresponding EU
standards (ČSN EN 71-1, ČSN EN 71-3) and received
quality and safely certifications from a leading Czech
testing lab - Engineering Test Institute (Strojírenský
zkušební ústav, s.p.) as well as from the internationally
recognized TÜV SÜD Czech s.r.o.
Producer: Intrea-Piko, s. r. o., Sasanková 2657/2, 106 00
Prague 10, Czech Republic
WARRANTY LIST
General regulations: The content, extend and duration of the warranty conforms to the valid legal code in
the respective country of the purchase of the running bike.
Warranty period: The buyer of the new Yedoo running bike (product) can apply the warranty during the
period of 24 months from the purchase. The warranty commences on the day of the sale to the end user
and is automatically extended when the product is taken into repair during warranty period.
Warranty application: The warranty must be filled out with the retailer, where the product was purchased
(see bellow). When applying the warranty, we recommend presenting the filled out sheet bellow, the rece-
ipt and a complete and cleaned product. The seller will give a written confirmation to the buyer regarding
the acceptance of the product into the warranty process.
Warranty conditions: The product must be assembled following the instructions of the manual. The
products shall only be used for the purposes, which it was designed for. The product must be stored and
maintained in the ways in accordance with the Instruction manual. The warranty does not cover damage
caused by common wear and tear is not covered by this warranty. The producer does not cover damage
caused by incorrect assembly or by use in contradiction with the Instruction manual.
Product model:
Serial number
of the frame:
Date of purchase:
Retailer:
Signature and stamp:
21