1.2
Cross-references used in these instructions
A
reference to a figure, e.g. figure A.
→
Reference to another section.
2
Safety information
2.1
Correct electrical installation
• Electrical installations must meet the national regulations and may only be carried out by a qualified
electrician.
• A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and
experience, he or she is capable of and authorised to judge and carry out the work commissioned to
him/her. This also includes the recognition of possible hazards and the adherence to the pertinent
regional and national standards, rules and regulations.
• For your own safety, please consult a qualified electrician.
• Route cables such that they are protected from damage and do not present a tripping hazard.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-
proof).
• Protect the plug connection from moisture.
• Only connect the unit to a correctly fitted socket.
2.2
Safe operation
• The impeller unit in the pump contains a magnet with a strong magnetic field that may affect the
operation of pacemakers or implantable cardioverter defibrillators (ICDs). Always keep magnets at
least 0.2 m away from implanted devices.
• Never carry or pull the unit by the electrical cable.
• Never carry out technical changes to the unit.
• Only carry out work on the unit that is described in this manual. If problems cannot be overcome,
please contact an authorised customer service point or, if in doubt, the manufacturer.
• Only use original spare parts and accessories for the unit.
3
Product Description
3.1
Overview
A
Description
1
Filter pump
2
Controller for regulating the speed of the filter pump
• Control via the OASE App "Easy Switch"
3
Retaining frame for mounting controller to the wall
4
Ground stake for mounting controller at ground level
5
Stepped hose adapter with ball joint, seal, coupling nut and hose clip
6
Stepped hose adapter with coupling nut and hose clip
- EN -
19