Product Description; Unit Configuration; Properties; Intended Use - Oase BioTec ScreenMatic 2 Notice D'emploi

3

Product Description

3.1

Unit configuration

 A ScreenMatic rotating screen unit
1 Control device
2 Operating panel
3 Sensor underneath the control device
• When the sensor comes into contact with the water on the ScreenMatic screen, an automatic cleaning process is triggered.
4 Stripper
• scrapes the debris from the ScreenMatic screen and conveys it into the debris tray.
5 ScreenMatic screen
6 "Max. water jet" mark
• Debris may be washed out of the debris collection tray if the water jet from the water distributor exceeds this mark.
7 Transformer
• Voltage supply for the control device and motor
8 Motor
• Drive of the ScreenMatic rotating screen unit
 B, C, D BioTec ScreenMatic² 40000/60000/140000
1 Inlets, 2 x
2 Water distributor
3 Distributor extension
4 Brush for regularly cleaning the ScreenMatic screen
5 Substrate tube
• BioTec ScreenMatic² 40000:
• BioTec ScreenMatic² 60000:
• BioTec ScreenMatic² 90000:
• BioTec ScreenMatic² 140000:
6 Separating plate
• can be removed from the BioTec ScreenMatic² 40000/60000/90000 for maintenance purposes.
7 Foam filter
• BioTec ScreenMatic² 40000/60000:
• BioTec ScreenMatic² 90000:
• BioTec ScreenMatic² 140000:
8 Blind plug for closing the outlet (14)
• Closing the outlet before cleaning the foam filters prevents dirty water from flowing back into the pond.
9 Dirt outlet
10 Foam cleaning device
11 Holder for the foam cleaning device
12 Dirt outlet slide valve
13 Debris tray
14 Outlet
3.2

Properties

• High performance flow-through filter for ponds up to 40 m
• Electrically driven ScreenMatic rotating screen for automatic removal of coarse debris.
• Low-maintenance filter due to the automatic removal of coarse debris.
• Bottom dirt outlet with slide valve for removal of dirt/debris from the filter system.
• Convenient cleaning of the foam filters directly inside the filter.
• Foam cleaning device and holder for fastening the foam cleaning device to the container.
• Perfectly tailored to the OASE AquaMax Eco filter pumps.
• Direct connection of the OASE UVC clarifiers of the Vitronic 18W/24W/36W, Bitron C and Bitron Eco series
possible.
• Use of different filter media to ensure optimum colonisation of bacteria for biological filtration.
3.3

Intended use

BioTec ScreenMatic² 40000/60000/140000, referred to as "unit", may only be used as specified in the follow-
ing:
• For cleaning garden ponds.
• Operate in accordance with instructions.
3.4

Possible incorrect use

The following restrictions apply to the unit:
• Only operate with water at a water temperature of +4 °C to +35 °C.
• Never use the unit to convey fluids other than water.
2 x
3 x
4 x
12 x
8 x
16 x
18 x
3
, 60 m
3 3 3
, 90 m or 140 m .
- EN -
31