Changing Plates
This section describes how to remove and replace the plates on the motherboard
heatsink, I/O cover and audio cover.
Replacing heatsink plate
1
Wrap the tip of the flat-head screwdriver
in a cloth.
3
Remove the plate.
Replacing audio cover plate
1
Wrap the tip of the flat-head screwdriver
in a cloth.
2
Use the flat end of the screwdriver into
the corner of the plate as indicated
above, and then to pry the plate away
from the heatsink.
4
Replace the plate by gently pressing it
into the heatsink as shown above.
2 2
Use the flat end of the screwdriver into
the corner of the plate as indicated
above, and then to pry the plate away
from the audio cover.
35
Changing Plates