Internal Connectors
Internal Buttons
Jumper
Debug LED
I/O Controller
Hardware Monitor
Form Factor
6
Specifications
Continued from previous page
y 1x 24-pin ATX main power connector
y 2x 8-pin ATX 12V power connector
y 1x 6-pin ATX 12V power connector*
y 8x SATA 6Gb/s connectors
y 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
y 2x USB 3.1 Gen1 connectors (supports additional 4 USB 3.1
Gen1 ports)
y 1x USB 3.1 Gen2 Type-C port
y 1x 4-pin CPU fan connector
y 1x 4-pin Water Pump connector
y 4x 4-pin system fan connectors
y 2x Front panel connectors
y 1x Front panel audio connector
y 2x RGB LED connector
y 1x TPM module connector
y 1x LED demo connector
* Provides additional power to PCIe x16 slots
y 1x GAME BOOST knob
y 1x Power button
y 1x Reset button
y 1x LED demo button
y 1x Clear CMOS jumper
y 1x Chassis Intrusion connector
y 1x Slow mode booting jumper
y 1x 2-Digit Debug Code LED
NUVOTON NCT6795 Controller Chip
y CPU/System temperature detection
y CPU/System fan speed detection
y CPU/System fan speed control
y ATX Form Factor
y 12 in. x 9.6 in. (30.4 cm x 24.3 cm)
Continued on next page