Ribimex Ribitech PRBAT20/VCSB Manuel D'instructions Et D'utilisation page 22

V. OPERATION
5.1- Intended use
- The product is intended for domestic use (indoor or under shelter).
- The product is intended for forward/reverse screwing (within tool own specifications).
- Do not use tool for any other use outside the scope of this manual.
- Any other use different from that indicated in these instructions may cause damage to the tool and
present a danger to the user.
- DO NOT use nor mount on the tool accessories that are not recommended by the manufacturer.
- The product is not intended for artisanal, commercial, professional and/or industrial use.
- Do not use for applications not covered in this manual.
- The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of machine.
5.2- Operation
Note: Before first use, charge the battery.
1. Ensure that battery is fully charged.
2. Wear appropriate protective equipment.
3. Insert compatible bit or accessory in the chuck.
4. Prepare material for work
5. Secure material if necessary.
Do not use your own weight or body to hold material.
6. Firmly hold tool to avoid kickbacks. Always maintain a balanced and secure position.
7. Place bit on workpiece. Do not make sudden movements.
8. Press on the trigger switch (4) to start operation.
Note: never touch or grasp the chuck or bit during operation.
9. Once work is finished, stop product by releasing the switch (4).
Note: do not put down product until chuck has completely stopped rotating.
Tips: Apply progressive load, excessive pressure overloads the motor unnecessarily, and can cause
damage.
CAUTION! Material Damage! Excess pressure can cause material damage.
WARNING! Do not become careless in assuming your knowledge of the tool.
DO not be filled (over repeated use) with a sense of ease and familiarity with the tool, neglecting strict
compliance to the safety instructions given with the tool.
Improper us of the tool or failure to comply with the provided safety instructions in this manual can
cause severe injury.
Remember that a split second of negligence is enough to cause serious damage.
Stay alert for your surroundings and especially for any danger that you may not hear while using the
tool.
Page 22 / 38