EN –
Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See Table 1
III. SAFETY INSTRUCTIONS
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise.
Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of
this product.
WARNING! When using electric tools basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Symbols (Explanation of symbols appearing on the tool, if applicable).
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas.
Do not expose product to extreme temperatures (too hot or too cold environment).
Protect from over exposure to direct sunlight.
Caution! Risk of injury and/or damage and/or deterioration of product in case of
noncompliance to safety requirements.
Read the instructions manual.
Wear protective equipment: face mask, ear and goggles protection.
Wear protective gloves and boots.
Keep all your body parts away from moving parts (e.g. chuck, bits)
Keep persons (esp. children) and animals away from product and working area.
Warning: Electrical hazard. Presence of electric current.
Disconnect product from its power source / remove the battery before maintenance, cleaning
or any intervention on product; or when you do not use product.
Disconnect battery charger power cable if cable or extension cord is damaged or cut during
operation. Unplug adaptor by pulling the plug. Do not pull the cable.
III. Safety instructions
IV. Getting Started
See Fig. 1
V. Operation
VI. Maintenance and Storage
Page 14 / 38