Peg-Perego primo viaggio adapter for tak Notice D'emploi page 7

_ Any weights hanging on the
handlebar or handles could make
the item unstable; follow the
manufacturer's instructions regards
the maximum loads transportable.
_ The front bar is not designed for
lifting the stroller + car seat with the
weight of the child, and does not
substitute for the waist belt.
_ Do not use the product near to
stairs or steps, heat sources, naked
flames or dangerous objects within
reach of the child.
_ Only replacement parts supplied
or recommended by the
manufacturer/distributor shall be
used. Do not use accessories that
have not been approved by the
manufacturer.
_ WARNING: This product is not
suitable for running or skating.
_ Do not use the handle bar of the
car seat to push the product.
_ WARNING: When using the car seat
in the car, check that the adapter
is not fastened to the car seat.
Remove the adapter from the car
seat before installing it in the car.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS
1 Primo Viaggio Adapter For Tak.
2 Assemble the 5 pieces of the Primo Viaggio Adapter
For Tak in sequence, as shown.
Before installing the Primo Viaggio Adapter For Tak to
the Tak stroller:
- remove the stroller's hood,
- fully lower the stroller's backrest,
- fully close the stroller's front bar.
3 You can now fasten the Primo Viaggio Adapter For Tak
to the Tak stroller.
Click it into the lateral hooks, on both sides.
4 To ensure correct attachment of the car seat, remove
the cover from the upper chassis hook.
5 Attach the car seat as shown until it clicks - ONLY
MUM-FACING (Arrow 1).
Finally, raise the stroller's backrest until it clicks (Arrow
2).
6 To remove the Primo Viaggio Adapter For Tak from
the stroller, press the button on both sides and pull it
upwards.
After removing the Car Seat from the Primo Viaggio
Adapter For Tak, the Tak stroller can be folded with
the adapter attached.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO
9001 standard. Peg Pérego can make changes at any
time to the models described in this publication for
technical or commercial reasons.
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PEG PEREGO S.p.A. and are
protected by the laws in force.
- 7 -