8
Place a suitable coffee filter in the coffee filter holder (10).
9
Close the filter holder assembly (1 1) until the release button (12) clicks into place.
10 Set the coffee quantity. Refer to the section "Setting the coffee quantity".
1 1 Set the coffee strength. Refer to the section "Setting the coffee strength".
12 Place the coffee pot (16) on the storage plate (18).
13 Switch on the appliance by pressing the on/off button (1). After a few seconds, the
appliance starts grinding the coffee beans and making the coffee.
14 To interrupt the process, press the on/off button (1).
15 If the process is completed, the appliance will beep. The appliance can be switched
off by pressing the on/off button (1).
16 Allow the appliance to cool down completely.
Making coffee with ground coffee (fig. A, B, C, D, F & G)
Note: Use only ground coffee and basket filter bags of size 80/200 mm.
1
If the grinding function is activated, press the grinding button (2) to deactivate the
grinding function. The coffee quantity and the coffee strength are not shown on the
display.
2
Fill the water reservoir (14) with the required amount of water. Do not fill the water
reservoir with more water than required for making the coffee. Only use the amount
of water required for making the coffee. The appliance automatically stops when
the water reservoir is empty.
3
Press the release button (12) to open the filter holder assembly (1 1).
4
Place a suitable coffee filter in the coffee filter holder (10).
5
Put the required amount of coffee in the coffee filter.
6
Close the filter holder assembly (1 1) until the release button (12) clicks into place.
7
Place the coffee pot (16) on the storage plate (18).
8
Switch on the appliance by pressing the on/off button (1). The appliance starts
making the coffee.
9
To interrupt the process, press the on/off button (1).
10 If the process is completed, the appliance will beep. The appliance can be switched
off by pressing the on/off button (1).
1 1 Allow the appliance to cool down completely.
EN
33