Product Description And Specifications - Berner BACD-1 BL 12V Notice Originale

Only use the battery with products from the
u
manufacturer. This is the only way in which you
can protect the battery against dangerous over-
load.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
Product Description and
Specifications
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or ser-
ious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended use
English
The power tool is intended for driving and loosen-
ing screws and for drilling in wood, metal, ceramic
and plastic.
Product Features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Keyless chuck
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button
(5) Battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) "PowerLight" lamp
(10) Handle (insulated gripping surface)
(11) Screwdriver bit
(12) Universal bit holder
(13) Belt clip
(14) Bit holder
(15) Colour clip
Technical Data
English
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
14 | English
Cordless drill/driver
– First gear
– Second gear
Max. torque, hard/soft
screwdriving application
according to ISO 5393
Max. drilling diameter (first/second gear)
– Steel
– Wood
Max. screw diameter
Chuck capacity
Weight according to
EPTA-Procedure
01:2014
Recommended ambient
temperature during
charging
Permitted ambient tem-
perature during opera-
tion
age
Recommended batter-
ies
Recommended char-
gers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of
the power tool is 73 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed the
volume stated. Wear hearing protection!
Vibration total values a
certainty K determined according to
EN 62841-2-1:
Drilling into metal: a
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
BACD-1 BL 12V
noise emission value may differ. This may signific-
antly increase the vibration and noise emissions
370847
over the total working period.
V= 12
min
min
Nm
A)
mm
mm
mm
mm
kg
A)
°C
°C
B)
and during stor-
(triax vector sum) and un-
h
<2.5 m/s
h
1 609 92A 5H3 • 21.11.19
BACD-1 BL 12V
-1
0 – 460
-1 0 – 1750
35/20
10
32
8
0.8–10
0.93 - 1.2
0 to +35
-20 to +50
BBP 12V 2.0Ah
BBP 12V 6.0Ah
BBCF 12V
English
2 2
, K = 1.5 m/s ,