Weinmann BASE STATION 1 NG Notice De Montage page 7

Fitting to a wall
1. Look for a suitable place to mount the system, somewhere flat and
vertical.
2. Mark 5 boreholes where you want to fix the system, as indicated in the
drawing on the next page.
Note: You do not need all the bores in the wall mounting to attach
it to a wall. The drawing on the next page shows you which bores
you have to use and how they are spaced.
3. Drill the holes using a Ø 4.2 mm bit.
4. Insert 5 M5 threads in the substrate.
5. Screw on the wall mounting using the screws supplied. The portable
system must be fitted horizontally.
6. If present, connect the charger interface to the 12V on-board electricity
supply of the emergency vehicle using the connector for vehicles.
Note: you can also connect the charger interface directly to a 12 V
on-board electricity supply or fit an alternative 12 V connector to
the charger interface. To do this, please follow assembly instruc-
tions WM 67500.
7
EN