Use; Maintenance; Troubleshooting; Spare Parts - PLYMOVENT ICE-LC Manuel Opérateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Fig. 3.1 Motor driven damper connection (MD-X)
Fig. 3.2 Inductive Sensor (MCC-05) connection
Fig. 3.3 S-100, SK-300 & hood light connection
Fig. 3.4 MSR-24/2 micro switch connection
Fig. 3.5 PC-500 pressure switch connection
Fig. 3.6 Interconnection
0000101007/020812/A ICE-LC
Connections between the LC and other equipment in the
system are needed when you need them to interoperate.
4

uSE

The overrun time is adjustable between seven (7) seconds and
six (6) minutes. To adjust the overrun time of the LC unit
please locate the blue potentiometer wheel on the circuit card.
To increase the time, turn the wheel clockwise, and to
decrease the time turn it counter clockwise. Do not position
the wheel in the outermost directions.
5

MaINtENaNCE

The ICE-LC requires no specific maintenance.
6

tROubLEShOOtINg

If the ICE-LC does not function (correctly), please contact your
supplier.
7

SpaRE paRtS

The following spare parts are available for the ICE-LC (refer to
Fig. II on page 26).
pos.
art. No.
1
0000101411
2
0321400010
3
0000101412
8

ELECtRICaL DIagRaM

Refer to the separately supplied electrical diagram (also
attached to the inside of the control box cover).
9

DISpOSaL

After life of the product, dispose it of in accordance with state
or local regulations.

CE DECLaRatION

CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Wezelkoog 11, 1822 BL
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the product(s):
- ICE-LC
which this declaration refers to, is in accordance with the
conditions of the following Directives:
- EMC 2004/108 EC
- LVD 2006/95 EC
and is/are in conformity with the following harmonized
standard(s) and/or other such normative documents +
amendments, if any:
- EN ISO 61000-2
- EN ISO 61000-6
Alkmaar, the Netherlands, 1 September 2012
Ir. F. Coehoorn
Vice President Research & Development
Description
PCB ICE without buttons
Servomotor SA1.12
Fuse 0.4A 5X20 mm UL
EN - 5

Publicité

Table des Matières
loading

Produits Connexes pour PLYMOVENT ICE-LC

Table des Matières