SIGNIFY ALKCO Manuel D'installation Et Securite page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT MUST
BE PERFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
LAMPING & RELAMPING INSTRUCTIONS
Remove screw securing sheet metal plate to bottom of housing and remove the plate. See
Figure 4. Note that in doing so, the plunger of a safety switch will extend. This switch is a
safety feature that will ensure the extinguishing of the UVC lamp. This safety feature is NOT
a suitable substitute for failing to disconnect AC service at the breaker during future relamping.
FIGURE 4
Rotate louver assembly forward and downward to access UVC lamp chamber. See Figure 5.
Insert lamp into lamp holders and rotate lamp to secure it. Rotate louver assembly back into
original position and replace sheetmetal plate and screw removed in Figure 4. Ensure that
plunger of safety switch is depressed by the sheetmetal plate.
FIGURE 5
CAUTION: Electrical luminaires are designed for permanent installation in ordinary (non-hazardous) locations in accordance with the National Electrical
Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and luminaire operate at high
temperatures, contact with combustible materials can cause fire and personal contact can cause severe burns.
© 2021 Signify Holding. All rights reserved. This document may be subject to change. No
representation or warranty as to the accuracy or completeness of the information
included herein is given and any liability for any action in reliance thereon is disclaimed.
All trademarks are owned by signify holding or their respective owners.
EXTENDED SWITCH PLUNGER
SHEETMETAL PLATE
LOUVER ASSY ROTATED
FORWARD AND DOWNWARD
FOR UVC LAMP INSTALLATION
Safety and Installation Instructions
UWL120-UNV-1/1-EB
ATTENTION : L'INSTALLATION ET L'ENTRETIEN DE CE PRODUIT DOIVENT ETRE
EFFECTUÉS PAR UN ÉLECTRICIEN OU UN MEMBRE DU PERSONNEL QUALIFIÉ.
OR REPLACEMENT.
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Telephone: 855-486-2216
90029520I84598322
SECURING SCREW
Signify Canada Ltd.
281 Hillmount Road
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
Rev. 2 - 5/21

Publicité

Table des Matières
loading

Table des Matières