Télécharger Imprimer la page
SIGNIFY Day-Brite CFI FluxStream LED Wrap Instructions D'installation

SIGNIFY Day-Brite CFI FluxStream LED Wrap Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

INSTALLATION INSTRUCTIONS
FLUXSTREAM LED WRAP
Page 1 of 4
1) Remove unit from carton and inspect to ensure no shipping damage has occurred.
2) This luminaire is supplied with knockout holes for wiring access across the back of housing and side of each end cap.
Note: There are two endcaps on each side. An inner metal endcap and an outer plastic endcap. Each has a KO that must
be removed for wiring access.
3) Luminaire can be surface mounted with screws or bolts supplied by the customer or with hanger brackets.
- To install with HANGER BRACKETS (See FIG.1):
A. Mount hanger brackets to structure with #8 screws.
B. Once mounting brackets are secured to surface, snap luminaire into brackets. Mounting bracket should be secured into
reveal of luminaire. Tighten mounting bracket with #8-18 x 2" bolt that is provided.
C. For stand alone installation bring customer supply wires into luminaire though preferred knockout hole. Make
electrical connection per electrical code.
4) To install with optional chain/hanger kit (PURCHASED SEPARATELY): Remove the V-Hook and chains from the bag
pack. Hook the V-Hook into each end of the luminaire in provided holes. The chains should then be attached to the
permanent structure of the building.
5) To install with cable/stem mounting assembly (PURCHASED SEPARATELY):
A. Mount cable or stem to building structure above luminaire.
B. Remove stem mount KOs shown in Fig 1 at each end of fixture
C. Mount cable or stem to fixture in KO hole using included hardware.
- Proceed to page 2 -
STEM MOUNT KO
CAUTION:
This fixture is designed for permanent installation in ordinary (Non-Hazardous) locations in accordance with the National Electrical Code and
all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and fixture operate at high temperatures.
Contact with combustible materials can cause fire and personal contact can cause severe burns.
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
CAUTION: THE INSTALLATION AND SERVICING OF
THIS PRODUCT SHOULD BE PERFORMED BY A
QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
CABLE MOUNT ASSY
(PURCHASED SEPARATELY)
SURFACE MOUNT SCREWS
HOUSING REVEAL
MOUNTING BRACKETS
FIG. 1- STAND ALONE CONFIGURATION
Signify Canada Ltd. / Signify Canada Lte
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
KO FOR
WIRING ACCESS
KOs FOR
WIRING ACCESS
12NC: 442100317150
DB100425 4/21/2021
V-HOOK ASSY
(PURCHASED
SEPARATELY)
(ENGLISH)

Publicité

loading

Sommaire des Matières pour SIGNIFY Day-Brite CFI FluxStream LED Wrap

  • Page 1 Contact with combustible materials can cause fire and personal contact can cause severe burns. 12NC: 442100317150 DB100425 4/21/2021 Signify North America Corporation Signify Canada Ltd. / Signify Canada Lte 200 Franklin Square Drive 281 Hillmount Road (ENGLISH) Somerset, NJ 08873...
  • Page 2 Contact with combustible materials can cause fire and personal contact can cause severe burns. 12NC: 442100317150 DB100425 4/21/2021 Signify North America Corporation Signify Canada Ltd. / Signify Canada Lte 200 Franklin Square Drive 281 Hillmount Road (ENGLISH) Somerset, NJ 08873...
  • Page 3 12NC: 442100317150 DB100425 4/21/2021 Signify North America Corporation Signify Canada Ltd. / Signify Canada Lte 200 Franklin Square Drive 281 Hillmount Road (FRAN AIS)
  • Page 4 12NC: 442100317150 DB100425 4/21/2021 Signify North America Corporation Signify Canada Ltd. / Signify Canada Lte 200 Franklin Square Drive 281 Hillmount Road (FRAN AIS)