Safety Precautions - golmar GB2 Nexa Modular Guide Rapide

NEXA MODULAR GB2 AUDIO DOOR ENTRY SYSTEM - BUILDING

SAFETY PRECAUTIONS

- Always disconnect the power supply before installing or making modifications to the devices.
- The fitting and handling of these devices must be carried out by
- The wiring must run at least 40 cm away from any other wiring.
- On the power supply unit (FA-GB2/A):
Do not overtighten the screws on the connector.
w
Install the power supply unit in a dry and protected place free from the risk of water leaks or sprays.
w
wAvoid locations that are humid, dusty or near heat sources.
wEnsure that the air vents are free from obstruction so that air can circulate freely.
wTo avoid damage, the power supply unit must be firmly secured in place.
wTo prevent electric shock, do not remove the cover or handle the wiring connected to the terminals.
( ) CHARACTERISTICS
*
- Audio door entry system with simplified wiring (non-polarised 2-wire bus).
- Up to 4 access panels (DP-GB2A distributor required for more than one access panel) per
installation.
- Up to 32 telephones and apartments with T-562/TNHEA telephones per installation and max. 4
telephones per apartment (EL642 GB2A set to 'operating mode 1').
- Up to 128 telephones and apartments with T562/TNHEA telephones per installation and max. 1
telephone per apartment (EL642 GB2A set to operating mode 2 'audio only').
- Call confirmation tone.
- Visual signals on the door panel for people with impaired hearing (indicating call process,
communication, door open and channel busy).
- Audible signals on the door panel for people with impaired vision (indicating call in progress, missed
call, door open, call finished and engaged).
- Operating modes can be set on the EL642/GB2A sound module.
- Connection of an external camera "CCTV" for the
See the "TDP-CAM-GB2 user manual (code 50123590)".
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that
the call is being made and LED will turn on. If vocal synthesis is enabled, a 'Call is in progress'
message appears indicating that a call is being made. At this moment the apartment's
telephone(s) receive(s) the call. If another apartment is called by mistake, press the button for the
correct apartment and the first call will be cancelled.
- The call lasts for 40 seconds. If the call is not answered within 40 seconds, LED
the channel will be freed.
- To establish communication, lift the handset of any telephone in the apartment. Door panel
LED will turn on.
- The communication will last for one and a half minutes or until the handset is replaced. When
communication has finished, LEDs and
synthesis is activated, a 'Communication is finished' message will indicate that the call is over.
If the door panel has an EL3002 GB2/H module with icon
the EL3002 GB2/H module will illuminate. Make sure that the hearing aid is 15-25 cm away from
the door panel to ensure maximum audio quality during communication with the apartment.
- To open the door, press button (if it exists and, to open the second door, press button
during the call or communication processes: one press activates the lock release for five
seconds and LED will also turn on for five seconds. If vocal synthesis is enabled, a 'Door
Opened!' message will be indicated on the door panel.
- For a description of the functioning and setup of the telephone, see the telephone's user manual.
( )
For more information, see the T632/GB2A user manual (code 5012
*
https://doc.golmar.es/search/manual/50121981
authorised personnel
.
door panel (required DP-CAM-GB2 module).
will turn off and
will turn off and the channel will be freed. If vocal
displayed on the front, the LED of
1981 . )
2
NEXA MODULAR GB2 AUDIO DOOR ENTRY SYSTEM - BUILDING
INSTALLATION OF THE DOOR PANEL
( )
*
1650
1450
EL642/GB2A
T-562
Code Telephone
ON DIP
C. 01
1 2 3 4 5 6 7
ON ON DIP DIP
C. 10
1 2 3 1 2 3 4 5 4 5 6 7 6 7
ON DIP
C. 08
1 2 3 4 5 6 7 6 7
ON DIP
C. 06
1 2 3 4 5 6 7 6 7
ON DIP
C. 04
6 7 6 7
1 2 3 4 5
ON DIP
C. 02
1 2 3 4 5 6 7 6 7
( )
*
Description and settings:
- EL642/GB2A sound module operating mode settings.
- Description of the visual signals on the door panel.
- Description of the vocal synthesis (audible signals on the door panel).
- Adjusting the vocal synthesis
( )
*
Adjusting the door panel communication volume.
To adjust the audio volume on the door panel, perform the following steps:
- Call an apartment.
- When the call is received in the apartment, establish communication by picking up the
telephone handset.
- Then press the button used to call the apartment for 3 seconds until a number of confirmation
tones are heard and the door panel communication LED
- Each press on the call button will increase the door panel volume and blink speed of LED .
There are 5 volume settings and the blink speed of LED
blink - low to high volume. After reaching setting 5, maximum blink speed and volume, the next
)
setting is 1, minimum blink speed and volume (carousel mode).
-
To save the volume setting keep the button pressed until a number of confirmation tones are
heard and the door panel communication LED turns off.
( ) For more information, see the T632/GB2A user manual (code 5012
*
https://doc.golmar.es/search/manual/50121981
Embedding box dimensions:
M dul s o e 1 2
Model N CE 90C V S N CEV90C
1850
W (width) 99 99
H (height) 13 5,5 2 38
D (depth) 40 56
Code Telephone
ON DIP
C. 30
1 2 3 4 5 6 7
T-562
ON DIP
C. 28
1 2 3 4 5 6 7
ON DIP
C. 26
1 2 3 4 5 6 7
ON DIP
C. 24
Code Telephone 1 2 3 4 5 6 7
ON DIP ON DIP
C. 22
C. 00
1 2 3 4 5 6 7 1 2 3 4 5 6 7
EL610D
ON DIP ON DIP
C. 09 C. 20
1 2 3 4 5 6 7 1 2 3 4 5 6 7
ON DIP ON DIP
C. 07 C. 18
1 2 3 4 5 6 7 1 2 3 4 5 6 7
ON DIP ON DIP
C. 05 C. 16
1 2 3 4 5 6 7 1 2 3 4 5 6 7
ON DIP ON DIP
C. 03 C. 14
1 2 3 4 5 6 7 1 2 3 4 5 6 7
ON DIP
ON DIP
C. 11 C. 12
1 2 3 4 5 1 2 3 4 5
6 7 6 7
language/ volume and contact type for relay1/relay2.
starts to blink.
will increase for each. Slow to fast
3
3
CEV90
99 mm.
328 mm.
56 mm.
EL610D
Code Telephone
ON DIP
C. 29
1 2 3 4 5 6 7
ON DIP
C. 27
1 2 3 4 5 6 7
ON DIP
C. 25
1 2 3 4 5 6 7
ON DIP
C. 23
1 2 3 4 5 6 7
ON DIP
C. 31
1 2 3 4 5 6 7
EL610D
ON DIP
C. 19
1 2 3 4 5 6 7
ON DIP
C. 17
1 2 3 4 5 6 7
ON DIP
C. 15
1 2 3 4 5 6 7
ON DIP
C. 13
1 2 3 4 5 6 7
ON DIP
C. 21
1 2 3 4 5
6 7
1981 ) .