General Setup Page; Preference Page - Blaupunkt DVB-C Série Guide De L'utilisateur

too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
Note: USB record function is only available in Digital TV mode. Due to
copyright laws and illegal copying/recording it is not possible to record to/
from any other input/output source.
DVD Menu*
To access this menu, press [D. MENU] button on the remote control.
If you wish to make changes to any of the default settings, use
the scroll ▲/▼/◄/► buttons. To confi rm any settings press [OK]
button. To exit this menu at anytime, press [EXIT] button.

General Setup Page

TV Display - Choose from the following options 4:3
– PanScan - PS Traditional picture format, often used on old fi lm
– 4:3 LetterBox - LB Traditional picture which
has been adapted for widescreen
– Wide - Widescreen picture format
OSD Language - Select desired language
Audio Setup Page
Speaker Setup - Choose from the following options
– LT/RT - Set LT/RT Downmix
– Stereo - Set Stereo Downmix
Dolby Digital Page
Dual Mono
– Stereo - Outputs 2 channels of sound both left and right
– Mono L - Outputs left side sound
– Mono R - Outputs right side sound
– Mix Mono - Outputs a single channel of sound
but mix between right and left
Dynamic Range - This is the diff erence between the quietest and loudest
sounds. This setting works only with DVD discs recorded in Dolby digital.

Preference Page

TV Type - Choose from the following options
– NTSC - Normally used for discs from North America, Japan etc
– PAL - The standard for discs from UK/Europe, most of Asia, Australia etc
– Multi - For both NTSC and PAL
Default - This option allows you reset all DVD settings to factory settings.
*- only for devices equipped with built in DVD Player
13