Télécharger Imprimer la page

Babboe Curve Mode D'emploi page 4

Masquer les pouces Voir aussi pour Curve:

Publicité

Les langues disponibles

Les langues disponibles

EN | Rain Tent Babboe Curve - Manual for mounting
Congratulations on your new rain tent for your Babboe Curve cargo bike!
Below you will find the instruction manual for the rain tent.
To dismount the tent, follow the steps in the reverse order.
Step 1
Attaching the side bars to the box
Use the provided sidebars to attach the tent properly.
Unscrew the central nuts and bolts at the sides of the
box. Attach the sidebars with these nuts and bolts,
leaving the shims out. You can remove the bench from
the slot to make it easier to remove the nuts and bolts.
Step 2
Mounting the poles to the box
Mounting the poles to the carrier is simple, however, it should happen in the following
order:
1.
First, assemble the poles for the side of the handlebar (with the green sticker BACK)
and then insert them into the slots on the side of
the handlebar up to wider section of the poles
2.
Then, assemble the both parts of the central bar
and then insert them into the inserted poles
3.
Assemble the poles for the front side (with the red
sticker FRONT) and insert them into the central part
4.
Place the front poles into the slots on the front side
up to wider section of the poles. This creates the
necessary tension on the poles, ensuring a secure
structure
world
"The
kids
and your
right in front of you"
Step 3
Attaching the canvas
The order of assembly is essential for an optimum fit:
1.
Unfold the tent canvas and unzip all zips
2.
Place the canvas over the poles, the broad side on the
side and the small side with Velcro (for the handlebar) at
the side of the handlebar. The side with an opening for
ventilation is placed at the front.
3.
Pull the canvas downwards and close all zips. Make sure
the poles are correctly inserted in the sleeves of the canvas
4.
Feed the tie down straps through the sidebars (start at the
top) and tighten slightly (see photo)
5.
Is the tent in place? Then tighten all tie down straps so the
tent is secure
6.
Feed the ends of the tie down straps through the elastic band on the tie down straps
so they won't flap around in the wind
Opening the windows
Step 4
Open the window entirely and place it on the roof to allow children to get in. This way the
window is secured with Velcro. Close the window before cycling away.
Would you like to cycle with open windows? Fold the window up carefully and secure it
with the 'clips' on the top of the windows.
TIP:
A sunroof is also available for use in combination with the poles of the rain tent.
at your feet,

Publicité

loading