60
Hints for test institutes
Hints for test institutes
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and
using the test programme (see "Washing programmes").
Test in accordance with EN 50242 must be carried out when the salt container and rinse
aid dispenser have been filled with salt and rinse aid respectively and using the test pro-
gramme (see "Washing programmes").
Amount of detergent required:
Rinse aid setting:
Example loading arrangements:
Upper basket
Lower basket with cutlery basket
1) If there are cup racks in place on the lefthand side or the cutlery tray is in place, remove them.
2) If necessary, you can remove the cup racks on the lefthand side and/or the beer glass holder.
Full load: 12 standard place settings
1)
2)
5 g + 25 g (Type B)
position 4 (Type III)
Cutlery basket