Environmental Concerns; Declaration Of Conformity - auna multimedia Elegance 10028473 Mode D'emploi

Switch the ELEGANCE off . Then press and hold the multi functional button (1) for 5 seconds. The red and blue LED will
fl ash alternately to indicate the pairing mode. Activate BT on your smart device and connect to ELEGANCE. Type in
„0000" (4 x zero) if you are prompted to fi ll in a password.
You can connect the ELEGANCE to two BT devices. Shut off the headphones after the fi rst successfull pairing (press and
hold (1)) and repeat the procedure using another BT device.
To use the two devices simultaneously, press VOL+ and VOL- (3 & 4) at the same time, in order to activate the multi
point connection.
APT-X: Featuring the apt-X codec, the headsets can connect wirelessly to any apt-X enabled devices, vastly improves
the quality of BT streaming, delivering CD-quality sound.
Connect with an NFC device: Ensure that NFC is enabled on your mobile device. Then turn the ELEGANCE on and
slowly slide the NFC zone of the headset directly against the NFC device until an NFC connection is confi rmed.
Charge the ELEGANCE connecting it with the supplied USB cable to either a computer USB port or to a suitable USB
AC/DC adaptor.
Continuously charge for at least 2 hours.
When connected to an iOS device, the battery status will be displayed on the display (of the iOS device).
You can connect the ELEGANCE to any audio source (like smartphones, MP3 players or the like) in the conventional
way, using the supplied 3.5mm audio cable. When using the headphone like that you do not need to switch it on. The
internal battery will not be in use. In this case you can not use the hands free and BT functions.
According to the European waste regulation 2012/19/EU this symbol on the product or on its packag-
ing indicates that this product may not be treated as household waste. Instead it should be taken to
the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will hep prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact your local
council or your household waste disposal service.
Producer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany
This product is conform to the following European directives:
2014/53/EU (RED)
2011/65/EC (RoHS)
Standby LED (blue) fl ashes slowly
Incoming Call LED (blue) fl ashes continuously
Low Battey LED (red) fl ashes slowly
Charging LED (red) keeps lighting continuously during charging;
Pairing (BT)
Charging via USB
Audio-In

Environmental Concerns

Declaration of Conformity

LED Status
blue LED fl ashes upon charging is completed
9