Security Settings - Siyata Mobile TRUCKFONE Manuel D'utilisation

Mode Preference
Network operating mode (WCDMA / GSM).
Network Select
The method by which the device locks onto a network (automatic or
manual selection).
3.4.3 Security Settings
Using this interface, the device can be locked to prevent unauthorized
use, to reset the phone, and to return it to factory settings.
Phone password
In this menu you can lock the device using a private code (default
is 123456) and select how it is locked (immediately, or when next
started).
PIN Code
Through this menu you can lock the device by a release code, which
is the PIN code assigned to the USIM card in use. Additionally, the PIN
code can be changed.
Restore defaults
In this menu you can return the device to its initial state of operation
and all the contents and user settings will be deleted and returned to
its factory settings.
In order to implement this operation the device's private code is
required.
FDN List
In this menu you can see the list and dial contacts by pressing or
call or send SMS, by using "Opt." and without the possibility of edit.
If there are no contacts stored on your device or on the SIM, the user
is required to enter at least one contact to the above menu to make
this menu available.
24