Additional Features; Setup Examples; Sleep Mode - MWM Phase Guide De Démarrage Rapide

Additional features

For the features below to work, the Receiver has to
be connected to a power source.
Put the Remote you want to pair on the empty dock of your
choice on the Receiver and long press (3 sec.) the matching
Pairing
Setup button. Your new Remote is paired with the Receiver
when its LED stops flashing.
Needed when you have
more than 2 Remotes
Note: Each dock of the Receiver can only have one Remote
paired at the same time.
Press one time the Setup button to pause the matching Remote.
When the Remote is paused, the LED slightly fades.
Pause/Play
Press the button again to reactivate the Remote.
A paired Remote out of the Receiver automatically goes to
sleep mode after 10 minutes of immobility. Sleep mode lets you

Sleep Mode

save power when you're not using Phase.
To wake your Remote from sleep mode, simply make it move.
To turn on a Remote, simply put it on one of the docks of your
Receiver. Your Receiver needs to be connected to a power
source.
Turn on/off
the Remotes Remotes automatically shut down after 10 minutes of Sleep
mode or 10 minutes after the Receiver has been unplugged.
Note: you can set the timeout before extinction from the
configuration software.
Turn on/off
Simply plug the Receiver to any USB power source (5V) to turn it
the Receiver
on, and unplug it to turn it off.
4

Setup examples

4
3
2
5
1
6
4
3
5
2
6
1
7
Phase with integrated
7
DVS mixer
1
Phase Remote
2
Phase Receiver
3
USB power cable
4
Line out
5
Line in
1
6
Integrated DVS mixer
7
Computer
Phase with
analog mixer
8
1
Phase Remote
2
Phase Receiver
3
USB power cable
4
Line out
5
Line in
1
6
External DVS sound card
7
Analog mixer
8
Computer
5