Wc300 Advanced Programming; Accessing History Values; Professional Programming - Aerus Origins WC300 Manuel D'utilisation

WC300 Advanced Programming

Down Arrow
Set
Figure 33
The WC300 controller is designed to operate by only setting the
time of day and the day of the week. The remaining settings have
been set at the factory. These default settings will work for most
applications.
To change a setting:
Action Key
Enter basic
SET
programming
Move to desired UP or DOWN
display arrows
Enable setting
SET
to be changed
UP or DOWN
Change setting
arrows
Save setting SET
Return to
REGEN
operation
View history SET and
values DOWN
This level of programming is accessible by pressing the SET
button. The UP and DOWN arrows will step through the settings:
Time of day
Day of week
Time of regeneration
Number of days between regeneration (99 day timer)
Day of week regeneration (displays only when number of days
between regeneration equals zero)
(7 day timer)
Amount of regenerant used per regeneration or filter
backwash time
System capacity (view only)
Up Arrow Regeneration
Duration Display
Press and Will show day
release of week
Will increment
Press and
through the
release
displays
Press and Display will
release flash
Value changes
Press and
and continues
release
to flash
Press and Display stops
release flashing
Normal
Press and
operation
release
display
Press and
HO will be
hold for 5
displayed
seconds

Accessing History Values

The control features a review level that displays the operation
history of the system. This is a great troubleshooting tool for the
control valve.
To access history values, press and hold SET and DOWN for five
seconds to view the "H" levels.
History Values
Description
H0 Resin volume initial setting value
H1 Days since last regeneration
H2 Current flow rate
H3 Water used today in gallons/m
since Time of Regeneration
H4 Water used since last regeneration
in gallons/m
H5 Total water used since reset in
100s
H6 Total water used since reset in
1,000,000
H7 Average usage for Sunday in
gallons/m
H8 Average usage for Monday in
gallons/m
H9 Average usage for Tuesday in
gallons/m
H10 Average usage for Wednesday in
gallons/m
H11 Average usage for Thursday in
gallons/m
H12 Average usage for Friday in
gallons/m
H13 Average usage for Saturday in
gallons/m

Professional Programming

If a button is not pushed for thirty seconds the controller returns to
normal operation mode. Pushing the UP and DOWN arrows for 5
seconds returns the controller to normal operation.
Any setting that is a time display will not show "AM" for times
between 12:00 midnight and 12:00 noon. "PM" is displayed to
the right of the time for times between 12:00 noon and 12:00
midnight. When using the 24-hour clock, "PM" is not displayed.
In this level all of the programming features of basic programming
are available. In addition, the settings can be locked/unlocked.
24
Range
Cubic feet or liters
0-255
0-47 gpm or 0-177
Lpm
0-65536 gal or
3
0-6553.6 m
0-65536 gal or
3 0-6553.6 m
0-65536 gal or
0-6553.6 m
0-65536 gal or
0-6553.6 m
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
0-65536 gal or
0-6553.6 m
3
3
3
3
3
3
3
3
3
3
3
3