End Of Operation - Taski AERO 3500uicro Manuel D'instructions

Notice:
In some circumstances, certain combinations of
flooring/soiling and cleaning products may impair
the guiding of the machine.
- Optionally available wheels can improve the ma-
chine's traction on the floor. Please contact your TAS-
KI customer consultant.
Battery capacity - end of operational readiness
The battery level indicator provides information on the available oper-
ating time.
• If the red indicator begins to flash, approx. 5 minutes of
working time are left.
• The brush unit and side broom will be pulled up after that.
The red display switches to a continuous light.
• Now you have 10 minutes to drive the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.

End of operation

Automatic process
• Press the Program ON/OFF button.
• The suction motor is switched off.
• The side broom and brush unit are stopped and pulled up.
Replacing the dust bag
2
1
3
4
Removing and cleaning the dirt sieve
Removing and cleaning the roller brush
• Remove any hair wound around the brush or similar debris
and vacuum the rest of the dust up with a vacuum cleaner.
Removing and cleaning the side broom
6
Cleaning the machine
Never clean the machine with a high-pressure
cleaner or water jet.
Water ingress in the machine may cause considerable
5
damage to the mechanical or electrical parts.
• Wipe the machine with a moist cloth.
Storing/parking the machine (not in operation)
Store the machine with a lifted brush unit and re-
moved brushes.
Never store the machine with uncharged batteries.
Otherwise, the batteries will be damaged beyond repair.
• Empty the dirt sieve and vacuum the
remaining dust out with a vacuum
cleaner.
1
2
3
4
• Remove any hair wound around the
side broom or similar debris and vac-
uum the rest of the dust up with a
vacuum cleaner.
Caution:
Notice:
Caution:
5
11