Wired Controller; Remote Commander Operating Instructions; Adjusting Volume And Subwoofer Level; Switching Sources - Alpine PWD-X5 Manuel De L'utilisateur

Remote Commander Operating Instructions

Connect PWD-X5 wired controller to PWD-X5
machine and power on properly.
Note: The controller will not work if PC/BT is
connected
Adjusting Volume and Subwoofer
Level
1. Turn the knob to adjust the master volume,
press the knob once to change subwoofer
level.
2. Press and hold 2-3s to mute the output.

Switching Sources

1. Press the knob to change input source active.
2. Turn to select and press once to select.

Selecting Preset

1. Long press the knob (≥5S) to select preset.
2. Select the preset and press once to load.

Wired Controller

13