Traynor DG Série Guide De L'utilisateur page 6

1
Hi Lo Gain
5
0 10
Input
DG30D - 30w / 12-inch / Digital DSP and Digital Reverb
The Traynor DynaGain DG30D delivers a full 30-
watts through its high quality 12-inch Celestion™
speaker, making it perfect for rehearsals with the
band and personal practice. The two-channel
design allows switching between a pristine clean
tone and a searing lead tone; the optional AFS2
footswitch allows you to switch between channels
on the fly or for remote effects defeat. You can
also use the Channel Selector switch on the main
panel. The Traynor DG30D's 24-bit digital multi-
effects processor offers chorus, flange, vibrato
and four special effects. The Traynor DG30D has
RCA line inputs for quick connection of a CD,
MP3 Player or other audio devices, allowing any
audio source to be mixed with the guitar for play-
along practice. The 1/4-inch headphone jack also
makes the Traynor DynaGain DG30D an ideal
amplifier for practicing privately.
Features
• 30-Watts
• 12-inch Celestion™ Speaker
• Footswitchable* Clean and Overdrive Channels
• Bass / Mid / Treble Tone Controls
• On-board 24-bit Digital Effects Processor
(Chorus, Flange Vibrato and Special Effects)
with footswitchable defeat*
• 24-bit Digital Reverb with footswitchable defeat*
• Auxiliary Line Inputs for a CD, MP3 Player or
other audio devices.
• 1/4-inch TRS Headphone Jack that also
doubles as a Line Out.
* Using the optional AFS2 footswitch
1. Hi and Lo Input Jacks
Connect your guitar using a shielded ¼-inch
guitar cable to this jack. For a bright, high gain
sound, use the jack labelled Hi. For a darker,
lower gain sound use the jack labelled Lo. If you
use both jacks simultaneously, both jacks will be
high gain.
2. Gain
The Gain control varies the amount of overdrive
for channel 1. Channel 1 uses the Gain control
to allow more flexibility when trying to achieve
the perfect amount of distortion. For greater
distortion turn the dial clockwise, for less, dial the
control counter-clockwise.
2
VOLUME VOLUME
Bass Middle
5 5 5 5
0 10 0 10 0 10 0 10
CHANNEL
SELECT

Master Effects Effects
Volume Reverb Select Level
Treble
defeat
5 5 5
0 10 0 10 0 10 0
3. Channel 1 Volume
This controls the loudness of channel 1.
4. Channel Select Switch
This switch allows toggling between
channels 1 and 2.
5. Channel 2 Volume
This controls the level of channel 2. A bluesy
tone, with a bit of crunch, can be achieved by
increasing this control's setting.
6. Tone Controls
Bass/Middle/Treble Use these controls to
shape your tone.
7. Master Volume
The Master control adjusts the overall loudness
of the DG amplifier.
8. Digital Effects Section:
a. Reverb
The Reverb control sets the amount of
reverberation mixed with the guitar signal.
b. Effects Select
This sixteen-position selector let's you
choose from a variety of useful and
interesting effects. The effect types are
labelled on the chassis and include a variety
of choruses, flangers, vibrato effects, and a
selection of four special effects.
c. Effects Level
The Effect Level control adjusts the amount
of the selected effect, mixed with the
guitar's dry signal.
NOTE: The Red LED between the reverb control
and the Effect Select control indicates that the
digital effects section is functioning. If a footswitch
is connected you can bypass the effects
(including the reverb); this LED will turn off to
indicate when the effects have been bypassed.
9. CD Input
This input can be used to connect a CD player,
MP3 Player or other audio device enabling you
to jam along with your favourite tunes.
10. Power Switch
This switch turns your amplifier on or off. The
green LED next to the switch illuminates when
amplifier power is on.
11. Footswitch
An optional two-button latching-type footswitch
can be used for channel select and effects defeat.
(Yorkville Sound Part AFS-2 recommended).
CD Input POWER
5
10